RSX Exhaust
RSX Intake
RSX Brake Pads

SSR Roll Center Adjusters - DC5

SSR Roll Center Adjusters - DC5
  • Price: $227.95
N/A
Based on 0 Review(s)
Shop With Us
  • Shopping with us is secure. Guaranteed.
  • View / Write reviews for this product.
  • Lightning fast delivery!
  • SAVE $5.55 OFF! Deal expires in 15 minutes!

Product Overview

As you track your vehicle and experience tremendous lateral G-forces while entering and exiting turns, your suspension geometry changes; this much is common knowledge, but is often misunderstood. As your car experiences sideways forces, the upper and lower control arms change angles in relation to one another. Most people understand this part of the concept, and that the resulting change could pivot the centerline of the affected wheel in such a way as to produce a significant change in camber, resulting in less tire contact with the ground and, subsequently, poor traction and stability. What’s not understood is that simply “dialing in” negative camber to counteract these effects is a patch fix that doesn’t address the changing of the suspension geometry; it merely compensates for it. The trade off then becomes less predictable handling during turns and loss of straight-line stability due to unnecessarily increased camber, not to mention avoidable premature tire wear. This problem is aggravated when the camber is changed by adjusting the angle at the upper control arm; the angles between the upper and lower control arms help determine a vehicle’s roll center, and, where the roll center occurs in each side of the suspension.

To counteract this problem, SSR Front Roll Center Adjuster, an adjustable ball joint that connects to the lower control arm, not the upper, thereby allowing a more correct and apt suspension geometry between upper and lower control arms to be maintained; this insures a more predictable roll center, especially when used in conjunction with an upper control arm camber adjustment kit. The roll center adjuster is an essential part of any tuned suspension on a street or track vehicle lowered 2 inches or more. Vehicles equipped with adjustable upper control arms or camber plates should consider these necessity.

FITS: 02-04 RSX (DC5)

Recommended products list

Customers who bought this product also bought the following products:

Acura OEM Pipe B (Atf) - 02-06 RSX
Acura OEM NUT, HEX. (10MM) - 02-06 RSX
Acura OEM Rr. Bracket - 02-03 RSX
Acura OEM R. Side Step Garnish Assy. *Yr232l* - 02-04 RSX
Acura OEM R. Fr. Side Back Plate - 02-06 RSX
Acura OEM Lock-Up Solenoid Set - 02-06 RSX
Acura OEM Master Brake Cylinder Assembly - 02-06 RSX Type S
Full-Race K Series VerticalFlow Intercooler - RSX 02-05
Acura OEM Fuel Pump Assembly - 02-04 RSX
KSport Acura RSX 2002-2006 Type S Front 16.5" / 421mm SuperComp 8 Piston Big Brake Kit

Reviews

There are no reviews available for this product.
Write A Review

Write A Review

Note: Fields marked with a * must be filled in.

Your Name: *
Your Review's Title: *
Your Rating: *
Your Review: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
*